X-axis and Y-axis angle of a total of four alarm signal output pin, the user can adjust the angular position of the point of the alarm according to need, it does not require a microcontroller or a computer can be used in automatic control of the sampling .
the digital signal standard serial (UART) output (TTL level) , the inclination angle (acceleration) with a value of 16 bits (2 bytes) represents;
autobauding , serial communication baud rates from 110 to 38400 can automatically identify and working properly.
biaxial measurements , can detect X -axis, Y -axis angle changes.
measuring range for each axis are ± 90 degrees.
Resolution <0.004 degrees ( single-axis measurement, ± 25 within range ) .
Built-in temperature sensor ( internal temperature compensation is used ), the temperature of the sample data can be read via the serial port.
very low power consumption, operating current of only 1mA, especially for battery-powered applications.
Wide operating voltage ( + 3.0V ~ + 12V ), can be directly connected to 5V or 3Vmicrocontroller, can also be directly powered by lithium batteries.
specially optimized circuit board design, board underside of the power ground ( GND ), no other traces, which under normal circumstances can be installed in direct contact with the metal plate (frame), without an insulating pad.
Small size, light weight, ease of integration.
stable in all industrial device performance and reliability.
shock, anti-vibration.
electronic potting, moisture, anti-static, anti-radiation .
cost-effective.