STM32 + 4.3", 5.0", 7.0" TFTLCD
드라이버 모듈로 구동드라이버 IC는 SSD1963을 채택한 디스플레이 모듈입니다. STM32 CPU 버스의 고속 버스 인터페이스(FSMC)를
이용한 빠른 화면 전환이 가능하며 4선 저항식 터치스크린 연결용 단자가 실장되어 있습니다.
* LCD는 별매
상품입니다.
-
CPU: STM32F103VET6, TQFP100 feet; FLASH: 512K BYTES, SRAM: 64KBYTES
-
전원 LED (orange), 상태 LED (blue)
-
RS232, support 3 wire ISPs.
-
Interface USB2.0 SLAVE mode.
-
Micro SD (TF) card socket interface SDIO way.
-
2.4-inch TFT (240X320 (with touch screen) interface, using the MCU FSMC 16-bit interface mode control.
-
SPI bus control SST25VF016B (2M BYTES) serial FLASH
-
function keys
-
RTC with battery back-up battery holder.
-
The remaining port GPIO all leads.
-
SPI SST25VF016B read and write routines
-
RTC routines
-
Asynchronous serial communication routines
-
SDIO interface SD card reader routine manner (support SDIO 4-bit mode, supports SDHC card)
-
Way of SDIO interface SD card file system the Tini Fatfs0.07C routine (support SDIO 4-bit mode, supports SDHC card)
-
FSMC 16-bit mode TFT driver routines.
-
Resistive touch screen demo routines.
-
FSMC 16-bit mode ucos2.86, UCGUI3.90A demo routines.
-
FSMC 16-bit mode ucos2.86 UCGUI3.90A GIF animation demo routine.
-
FSMC 16-bit mode ucos2.86, UCGUI3.90A the LCD backlight adjustment demonstration routines.
-
Of the FSMC 16-bit mode ucos2.86 UCGUI3.90A NRF24L01 module communication, demonstration routines.
-
ucos2.86 routine.
-
The PC via the USB interface to read and write routines of the SD card (supports SDIO 4-bit mode, supports SDHC card).
-
PC through a USB interface to read and write SST25VF016B routines (2M U disk).
-
ENC28J60 network module based on the the UIP1.0 network protocol stack routines.
-
USB drive online programming MCU routine
40핀 2.54 핀헤더 컨넥터- XS2 커넥터
4.3 inch (480 x 272) and 5-inch (800 x 480) LCD
screen cable interface -XS1 커넥터
7인치(800 x 480) LCD AT070TN83
직결 가능
AT070TN92, AT070TN90 은 TCON 보드 필요함
XS3 40핀 컨넥터
＜5인치 터치 TFT
LCD＞
<LCD 연결>
- 각각 화살표 방향으로 연결부위를 열어 케이블을 연결해 줍니다. (※ 너무 무리한힘을 가할시 파손될수 있으니 주의바랍니다.)
<LCD 연결 모습>
※케이블 연결시 방향 유의해주시기 바랍니다.
SSD1963 driver board ----
Universal large 5-inch screen with touch (800X480) display driver (transplant
ucgui application routines and emwin5.12)
SSD1963
generic big screen driver board ---- 5-inch and 7-inch displays simultaneously
(transplant ucgui application routines and emwin5.12)
SSD1963
generic big screen driver board ---- 7 inch with touch (800X480) display driver
(transplant ucgui application routines and emwin5.12
<4.3인치LCD 동작예시>
<STM32 CPU 보드>
<7.0" Touch+LCD(800x480)>
<4.3" Touch+LCD(480x272), 5.0" Touch+LCD(800x480)>