STM32F407IGT6 개발보드는 Hi-Speed USB, SRAM, NAND Flash, 이더넷, 1.3 메가픽셀 CMOS 카메라, SD, 3.2인치 TFTLCD 모듈, 오디오포트 등으로구성되어 있습니다. 특히 ARM 32-bit Cortex ™-M3 CPU(ART Accelerator ™) ㄴ는 120MHz 주파수로 내부 플래쉬 제로웨이트(zero wait) 동작이 가능하여 최대 150DMIPS/1.25DMIPS/MHz (Dhrystone 2.1) 성능을 낼수 있습니다.
- Kernel: ARM 32-bit Cortex ™-M3 CPU, adaptive real-time accelerator (ART Accelerator ™) allows the program to the execution of up to 120MHz frequency in Flash to achieve zero wait state operation performance, built-in memory protection unit, to achieve Up to 150DMIPS/1.25DMIPS/MHz (Dhrystone 2.1) performance.
- memory : Up to 1 Mbyte of of Flash memory
- 512 bytes of the OTP memory
- Up to 128 + 4 Kbytes of of of SRAM
- flexible static memory controller supports Compact Flash, SRAM, PSRAM, NOR and of NAND memories
- LCD parallel interface modes, 8080/6800
- Clock, reset and power management
- 1.65 to 3.6 V application supply and I / Os
- POR, PDR, the PVD and BOR
- 4 to 26 MHz, the crystal oscillator
- Internal 16 MHz factory-trimmed RC (1% accuracy at 25 ° C)
- 32 kHz, oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
- Low power Sleep, Stop and Standby modes
- VBATsupply for RTC, 20 × 32 bit backup registers, and optional 4 KB backup SRAM
- 3x12-bit, 0.5μs the A / D converter • up to 24 channels
- up to 6 MSPS, in the triple interleaved the mode
- 2x12-bit D / A converter
- DMA : Universal 16-the stream DMA controller with centralized FIFOs. And burst support
- Up to 17 timers :Up to twelve 16-bit and two 32-bit Use the timers, up to 120 MHz, each with up to 4 the IC / OC / PWM or The pulse counter and quadrature (incremental is) encoder to the input
- debug mode: Serial of wire debug (SWD-) & the JTAG the interfaces
- the Cortex-M3 Embedded Trace Macrocell ™
- Up to 140 I / O port with interrupt function:
- Up to 136 fast the I / Os up to 60 MHz
- Up to 138 5 V-tolerant I / Os
- Up to 15 communication interfaces
- Up to 3 × I2C interfaces (SMBus / the PMBus)
- Up to 4 USARTs and 2 UARTs (7.5 Mbit / s, ISO 7816 interface, LIN, IrDA, modem control)
- Up to 3 SPIs (30 Mbit / s), 2 with muxed I2S to achieve audio class accuracy via audio PLL or external PLL
- 2 × the CAN the interfaces (2.0B Active)
- the SDIO interface
- Advanced interconnect • USB 2.0 full-speed device / host / OTG controller with on-chip the PHY
- USB 2.0 high-speed/full-speed device / host / OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
- 10/100 Ethernet MAC with dedicated the DMA: Support hardware IEEE 1588v2, the MII / RMII
- 8 to 14-bit parallel camera interface: speed up to 48M bytes / s
- CRC calculation unit
- 96-bit unique ID
- simulation of the random number generator
- 16M bit high-speed asynchronous CMOS static RAM
- 4G Bit of NAND the Flash
- IIC EEPROM
- 20-pin 2.54 pitch JTAG interface
- 10/100M Ethernet interface (MII, RMII two configuration mode)
- USB2.0 high speed master-slave device interface (mini)
- USB2.0 high speed host interface
- USB2.0 full-speed master-slave device interface (mini)
- USB2.0 full-speed host interface
- Two-way RS232 interface
- Two CAN2.0 interface
- SD memory card interface (4-bit)
- Audio output and microphone input interface
- LCD Interface 16-bit bus mode
- A controllable LED
- Three buttons with a wake-up function
- An adjustable resistor
- Large coin cell battery holder (because of the air embargo, the default the unworthy button battery)
- Core board 2.54mm pitch I / O pins exports can be installed in Wan with board
- STM32F407IGT6 코어모듈
- STM32F407IGT6 베이스 보드
- 3.2 인치 터치 TFTLCD 모듈
- 130만화소CMOS 디지탈 카메라 모듈
- RJ-45 UTP 크로스 케이블 (이더넷용)
- RS232C 케이블
- High Speed Mini USB 케이블
- 전원 아답터
- 구매시 제공 (영문 + 중문)